Hydraulic Conventional
 
CONVENTIONAL
BASIC BHPB Conventional Model With DRO (Digital Read Out) – Torsion Synchronized Hydraulic Press Brake Series

‘Bajaj – ACL’ BHPB series although their low investment cost, with high productivity and high quality work capacity, are the products which are preferred by conventional machine users and this model is the most selling model as it is equipped with encoders and DRO (Digital Read Out) for X & Y Axis, thus the operator is getting an accurate reading for both X & Y axis. This model is a pocket friendly machine with low price and high accuracy and is most selling model among the mass clientele today.

 
GENERAL FEATURES
Rigidly Welded, Mono Block Steel Frame for Minimum Deflection under Full Load.
Solid Torsion Bar Linkage for RAM parallelism and accuracy
Three Cycles of Operation INCH – SINGLE – CONTINUOUS for greater convenience and maximum output
Precision RAM Control and Accurate Back Gauge position – The High precision Linear encoders are mounted on the Back Gauge as well as on the top of the RAM Plate. These encoders takes RAM Position and Back Gauge Movement reading and feeds them to the DRO(In Conventional Machines) and Controllers(In NC Machines).
Noiseless operation and least impact loads on tools and foundations
International Quality Hydraulic Components with specially designed compact manifolds gives smooth, silent and jerk less operation.
International Quality branded electrical components ensures trouble free operation over a period of time.
Movable foot switch to operate the machine from convenient positions.
Pre – Set, 2 speed bending cycle giving fast approach, slow bending (for maximum accuracy) and fast return, resulting in reducing idle travel time and improving productivity.
Cylinders from High Quality forged steel and are precisely honed. Pistons are hard chromed for longer life.
 
STANDARD ACCESSORIES
All Hydraulics are of Standard Make either from REXROTH – Germany or HUADE – European
All Electrical Components are from SNEIDER – Telemechanique (France)
Motorized Back Gauge and Motorized RAM Adjustment with DRO
Electrical control Panel with selection of ‘AUTO’, ‘INCH’ and ‘SINGLE’ Cycle AUTO mode of Operation
Back Gauge Having Two Finger Stops which can move Leftward / Rightward and Upward / Downward Manually by hand.
American – Parkar or Germany B & S make Oil seals
Fine Stroke Adjustment Rod with Limit Switches.
One Suitable Multi – V Die and Universal Upper Blade (Segmented) Hardened and Ground fitted on the machine.
Lower Table Hydraulic Crowning Structure (Special Feature – Only comes in our machine) ensures accuracy and uniform bend throughout the length of the work piece. (Available in Machines with Length of 3 mtrs. And above and thickness more than 4MM)
2 Nos. Pair of Front Sheet supports arms of 500mm length each, also can be moved in the T – Slots in full length from left to right.
Extra Throat Depth
Bending and Force calculation chart on the machine.
Movable Foot Switch to operate the machine from convenient positions
Pair of Die Lifting Links
Maintenance Tool Kit
Foundation Bolts and Leveling Plates
Comprehensive Instruction, Operational and Maintenance Manual in English
 
OPTIONAL ACCESSORIES
Ball Screw Back Gauge
Hydraulic Tool Clamping
NC Control Back Gauge
Controller for Z and R Axis
Sliding Sheet Supports
CE Marking
Rear and Side Guard Doors
Laser Safe Finger Protection
Light Curtain
Oil Cooler
Sliding sheet supports with swing away stoppers.
Photo Electric Finger Safety Guards
Automatic Lubrication System
Light Encode to Detect RAM position
Any Special Bending Tool (Other than standard tool supplied)
Extra Nos. of Back Gauge Finger Stops
Extra Nos. of Front Sheet Supporting Arms
Vibration Control Mounting Pads
First Fill of Hydraulic Oil
 
CONTROLLERS

A. OPTIONAL CONTROLLER
 
DELEM DA 41

The DA-41 control provides a complete solution for press brake applications for 2 axes. Including the axes control for the press beam and backgauge.
With its bright LCD display a clear and easy control is offered. DA-41 offers, retract function, memory capacity upto 100 programs and upto 25 bends per program.

DA-41 CNC Characteristics
High-definition LCD display
Position control of slip stop
Back gauge control
Angles programming
Moulds' technical parameters are established
Escaped materials control
100-step procedures
25 engineering steps for each procedure
Face-installation
Servo Control / Frequency Control /two speeds AC motor control
CYBELEC DNC 60
 
General Specifications
Controls 1 – 4 Axis
Keyboard with Large Keys
Monochrome graphic LCD screen 75 x 130mm
Automatic conversion: Inch / mm; US TON / Metric TON: PSI: 1000 / kg/cm2,
240 x 128 pixels with automatic contrast correction
Internal SRAM memory
N2X axes with High Speed Counting (250 Khz) with PID regular and programmable resolution.
Click to Download Technical Features
Click to Download Catalogue